Celeron M 1GHz PC104-Plus SBC w/ 8 USB 2.0 Ports

CPU-1472

Celeron M 1GHz PC104+ SBC w/ 8 USB 2.0 Ports

PRODUCT FEATURES

Architecture: PC/104-Plus (PCI + ISA Bus)

Processor:
Intel® Celeron® M 1GHz, 512KB L2 cache, 400MHz FSB

Chipset:
Intel® i855GME

RAM:
512MB DDR, 266MHz (PC2100), soldered onboard

OS Compatibility:

Linux, XP Embedded, Windows CE, VxWorks, QNX

BIOS:
Phoenix Award BIOS

IDE:
IDE ATA 100 Controller

USB:
8x USB 2.0 ports

Network:
1x Intel® 82562 Fast Ethernet Controller (10/100 Mbps)
TP RJ-45 Ethernet Adapter Sold Separately

Serial Ports:
2x Serial ports: 1 RS-232, 1 RS-232/422/485

Video Controllers:
Analog VGA output and Digital LVDS output

Audio:
AC97 Audio CODEC port (Adapter sold separately)

Other Interfaces:
Keyboard, Mouse, Auxiliary Power

Watchdog Timer:
2-255 seconds / minutes

Power Management:
- Temperature monitoring with hardware thermal management circuit
- Power fail NMI (safe operation between 4.75V and 5.25V)

PRODUCT INFORMATION

The CPU-1472 single board computer (SBC) combines an Intel® Celeron® M 1GHz (512KB L2 cache, 400MHz FSB), Intel® i855GME chipset, 10/100 LAN controller, 8x USB 2.0 ports, and standard PC interfaces to deliver exceptional computational performance and low power consumption for demanding embedded systems applications. System DRAM (512MB DDR, 266MHz PC2100) is soldered onboard to enhance shock/vibration resistance.

The CPU-1472 is a high reliability PC/104-Plus CPU module designed to operate without any active cooling (fanless) over extended operating temperature ranges (-40 to +85°C). All extended temperature range CPU modules are tested and qualified individually to ensure reliability. Parvus/Eurotech's rugged CPU cards have been widely deployed in demanding mobile military and commercial applications that involve high shock/vibration and temperature extremes. A structural heat spreader plate is integrated on top of each CPU module to dissipate heat from critical components over a large surface area to the enclosure wall.

This x86 CPU module is compatible with Linux, Windows XP Embedded, Windows CE, VxWorks, and QNX operating systems. The unit incorporates an embedded BIOS in a 1MB Flash re-programmable EPROM. Set-up parameters are also saved in Flash to enable the module to operate without a battery and avoid set-up corruption in the field.

Onboard interfaces include 1x Fast Ethernet Interface (10/100Mbps), 8x USB 2.0 ports, 2x serial ports, analog VGA and digital LVDS interfaces, AC97 audio interface, auxiliary power, keyboard and mouse ports, as well as a high speed IDE controller that supports IDE Flash devices (DiskonModule, CompactFlash and Flash Disk). Male PC/104 (ISA) and PC/104-Plus (PCI) bus connectors are found on the bottom of the board, enabling it to stack on top of other add-on modules. The module also includes a hardware Watchdog Timer and Real Time Clock (external backup battery needed).

ACCESSORIES: a cable set, RJ-45 10/100 Ethernet transceiver, USB adapter, and AC97 CODEC adapter are available separately. For first time users and to ease rapid implementation, a CPU development kit (DTK) is highly recommended. This DTK includes the CPU module, POST code card, cable set, and adapters all pre-installed on a benchtop PC/104-Plus development platform.

PRODUCT SPECIFICATIONS

Development Kit:
DTKs include benchtop development station with power supply, hard drive, CD-ROM drive, 3.5” Floppy drive and motherboard that includes serial, parallel, and PS/2 ports plus adapters to standard PCI and ISA buses. A PC/104 single board computer (SBC) module with standard utility cable set and accessory cables come full assembled on the base station to allow easy and immediate use of all of the features of the CPU, such as Ethernet and USB. Simply connect power, monitor, keyboard and mouse, and the unit is ready for use.

Dimensions:
3.550" x 3.775" x 0.732" (90 x 96 x 18.6 mm), excluding ISA/PCI connectors

Power:
Power Input: +5VDC

Power Consumption: 9.5 W typical; 13.5 W max

Humidity:
Up to 95% non-condensing

MTBF:
214,000+ hours (MIL-STD-217 @ GB-25°C)

Operating Temperature:
Extended Temperature: -40°C to +85°C (-40°F to +185°F) with proper structural heatsinking

Thermal Interface: For reliable fanless operation, this product integrates a flat aluminum thermal interface plate to facilitate structural heatsinking. A thermally conductive gap pad or coupling compound should be placed on top of this plate with the CPU board mounted in contact with the enclosure wall. Suggested gap pad suppliers include The Bergquist Company or AOS Thermal Compounds.

Special Order Options:
Conformal Coating; Commercial Temp Version (0ºC/+60ºC)