PRV-1059
5-Port PC/104 10/100 Fast Ethernet Switch
PRODUCT INFORMATION
PRV-1059 is a rugged VLAN-capable 5-port PC/104 Fast Ethernet switch featuring very low power consumption (1.5 watts typical) and highly reliable extended-temperature operation up to +85°C (185°F). Supporting auto-MDI-MDIX network installation, the board is designed for simple plug-and-play operation, enabling up to five embedded computing devices to be networked together using 10BaseT or 100BaseTX Local Area Network (LAN) connections.
Field programmable, port-based VLAN functionality is supported on select models. This powerful feature enables any combination of ports to be connected together in subnets for use in a small secure or non-secure network. Fully IEEE 802.3 and IEEE 802.3u compliant, its five transceiver ports are flexibly designed so that any port can serve as an uplink. The module can either be used as a standalone network switch (no processor board required) or in combination with embedded systems that support a PC/104 (ISA) bus.
The card integrates fully independent media access controllers (MACs), an embedded frame buffer memory, and a high-speed address look-up engine, along with support for auto-crossover, auto-polarity, auto-negotiation, and bridge loop prevention.
Qualified to MIL-STD-810 environmental standards, the compact PRV-1059 switch is ideally suited to space-constrained, high reliability aviation, industrial, military, and transportation applications where extreme temperature and high shock/vibration exist. The unit is only 3.550” x 3.775” (90x96 mm) in size. All versions include mounting holes to facilitate simple installation, as well as support for local or remote monitoring of LED activity for data RX/TX and connectivity.
Ethernet connections are made through either onboard RJ-45 jacks or right-angle, locking Molex connectors. The 4-pin Molex headers enable embedded systems to optionally mount RJ-45 jacks in a faceplate, endcap or enclosure using a Parvus cable set (sold separately), which includes five female Molex to RJ-45 adapters. Power connections can be made through either the PC/104 (ISA) bus or externally through a 2-pin Molex connector.
|
| PRODUCT SPECIFICATIONS |
| 100BaseTX / 10BaseT: |
 |
IEEE 802.3u, IEEE 802.3 Compliant |
| Data Transfer : |
|
10 Mbits/sec or 100 Mbits/sec, Full Duplex or Half Duplex Mode |
| Bus: |
|
16-bit PC/104 (ISA) for power only (optional) |
| Molex Connectors: |
|
Ethernet (4-pin right angle) P/N: 22-12-2044; mating P/N: 10-11-2043
LED's (4-pin straight) P/N: 22-11-2042; mating P/N: 10-11-2043
Power (2-pin right angle) P/N: 22-12-2024; mating P/N: 10-11-2023 |
| Power Consumption: |
|
1.5W (+5VDC @ 0.3A typical) |
| Frame Buffer: |
|
512Kb On-Chip Port Map Memory |
| Chipset: |
|
Marvell 88E6060 |
| Operating Temperature: |
|
-40°C to +85°C (-40°F to +185°F) per MIL-STD-810F Method 501.4, 502.4
|
| Storage Temperature: |
|
-55ºC to +100ºC (-67°F to +212°F) |
| Shock: |
|
Operational acceleration 20Gs, duration 11ms, 3-axis
per MIL-STD-810F, Method 516.5 (Jet & Helicopter Test Profiles)
|
| Vibration: |
|
Operational Vibration per MIL-STD-810F, method 514.5 (Jet & Helicopter Test Profiles)
|
| Weight: |
|
86.6 grams (0.190 lbs) |
| Dimensions: |
|
3.550" x 3.775" (90x96 mm) |
| MTBF: |
|
Calculated per MIL-HDBK-217F @ 40°C:
1,503,217 Hours (Ground Benign, Controlled GB, GC)
157,971 Hours (Airborne Inhabit Fighter, AIF)
60,164 Hours (Airborne Rotary Winged, ARW) |
| Workmanship: |
|
Assembled to IPC-A-610 Class III Workmanship |
| Options: |
|
Conformal Coating |
| RoHS: |
|
RoHS (2002/95/CE) Compliant |
| Ordering Note: |
|
Product formerly known as Switch104 |
|